LE 206 2F FKL

Technical datasheet:

d	Bore diameter	30
D	Outside diameter	62
B	Width inner ring	38.1
C	Width outer ring	18
s	Distance from inner ring side face to raceway centre	15.9
d1	Outer diameter inner ring	39.7
E	Distance from raceway centre to the hole for lubrication	5.1
Gs	Set screw	M6x0.75
sw	Hexagonal key size for set screw	3
r1,2	Inner ring Chamfer dimension	0.6
r3,4	Outside ring Chamfer dimension	0.6
Cdyn	Dynamic load rating	19.5
Co	Static load rating	11.2
Pu	Fatigue load limit	0.475
kg	Mass	0.28

Interchange:

OEM	Manufacturer	Comments
01141574	DEUTZ FAHR
01141971	DEUTZ FAHR
06215741	DEUTZ FAHR
1030-30G	RHP
1098016469	HOLMER
56206	FAG
9902892074	FORTSCHRITT
GYE30KRRB	INA
M-UC206D1	NTN
UC 206X30MM	PTI
UC206	NSK
UC206	NTN
UC206D1	NSK
UC206G2	SNR
UC206J7	FAG
YAR206-2F	SKF

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).