LE 212 2F FKL

Technical datasheet:

d	Bore diameter	60
D	Outside diameter	110
B	Width inner ring	65.1
C	Width outer ring	26
s	Distance from inner ring side face to raceway centre	25.4
d1	Outer diameter inner ring	75.5
E	Distance from raceway centre to the hole for lubrication	7.7
Gs	Set screw	M10x1
sw	Hexagonal key size for set screw	5
r1,2	Inner ring Chamfer dimension	1.5
r3,4	Outside ring Chamfer dimension	2
Cdyn	Dynamic load rating	52.7
Co	Static load rating	36
Pu	Fatigue load limit	1.53
kg	Mass	1.3

Interchange:

OEM	Manufacturer	Comments
01145565	DEUTZ FAHR
1060-60G	RHP
216479.0	CLAAS
56212	FAG
9902833545	FORTSCHRITT
9902892154	FORTSCHRITT
EGL00227R	GASPARDO
GYE60KRRB	INA
M-UC212D1	NTN
UC 212X60MM	PTI
UC212	NSK
UC212	NTN
UC212D1	NSK
UC212G2	SNR
UC212J7	FAG
YAR212-2F	SKF

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).