LE 215 2F FKL

Technical datasheet:

d	Bore diameter	75
D	Outside diameter	130
B	Width inner ring	73.3
C	Width outer ring	29
s	Distance from inner ring side face to raceway centre	27
d1	Outer diameter inner ring	92.1
E	Distance from raceway centre to the hole for lubrication	8.3
Gs	Set screw	M10x1
sw	Hexagonal key size for set screw	5
r1,2	Inner ring Chamfer dimension	1.5
r3,4	Outside ring Chamfer dimension	2
Cdyn	Dynamic load rating	66.3
Co	Static load rating	49
Pu	Fatigue load limit	2.04
kg	Mass	2.1

Interchange:

OEM	Manufacturer	Comments
1075-75G	RHP
56215	FAG
GYE75KRRB	INA
M-UC215D1	NTN
UC215	NSK
UC215	NTN
UC215D1	NSK
UC215G2	SNR
UC215J7	FAG
YAR215-2F	SKF

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).