LE 216 2F FKL

Technical datasheet:

d	Bore diameter	80
D	Outside diameter	140
B	Width inner ring	77.8
C	Width outer ring	30
s	Distance from inner ring side face to raceway centre	30.2
d1	Outer diameter inner ring	97.4
E	Distance from raceway centre to the hole for lubrication	8.2
Gs	Set screw	M10x1
sw	Hexagonal key size for set screw	5
r1,2	Inner ring Chamfer dimension	2
r3,4	Outside ring Chamfer dimension	2.5
Cdyn	Dynamic load rating	72.8
Co	Static load rating	53
Pu	Fatigue load limit	2.16
kg	Mass	2.8

Interchange:

OEM	Manufacturer	Comments
1080-80G	RHP
56216	FAG
GYE80KRRB	INA
M-UC216D1	NTN
UC216	NSK
UC216	NTN
UC216D1	NSK
UC216G2	SNR
UC216J7	FAG
UC216X80MM	PTI
YAR216-2F	SKF

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).