UET 210 2S FKL

Technical datasheet:

d	Bore diameter	50
D1	Hole diameter	29
L	Overall length	149
L1	Distance from the contact surface of housing to the bearing axis	90
L2	Length of attachment slot	19
A	Overall width	49
A1	Width of location slot	17.5
A2	Housing flange thickness	36
H	Housing height	117
H1	Distance between bottoms of location slot	101
N	Height of attachment slot	49
N1	Length attachment end	16
s1	Distance from locking device side face to raceway centre	27.6
kg	Mass	2.28
Cdyn	Dynamic load rating	35.1
Co	Static load rating	23.2
Pu	Fatigue load limit	0.98

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.