UEV 207 2S FKL

Technical datasheet:

d	Bore diameter	35
L	Overall length	110
A	Housing contact surface width	48
A1	Width of the top of the housing	30.5
H	Housing height	95
H1	Distance from the contact surface to the bearing axis	12
H2	Housing foot thickness	47.6
J	Pitch circle diameter	80
G	Thread	M14
G1	Thread length	20
s1	Distance from locking device side face to raceway centre	23.3
kg	Mass	1.37
Cdyn	Dynamic load rating	25.5
Co	Static load rating	15.3
Pu	Fatigue load limit	0.655

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.