| d |
Bore diameter |
10 mm |
| D |
Outside diameter |
30 mm |
| B |
Width |
9 mm |
| Cr |
Basic dynamic load rating, radial |
5.600 N |
| C0r |
Basic static load rating, radial |
2.600 N |
| Cur |
Fatigue load limit, radial |
179 N |
| nG |
Limiting speed |
37.500 1/min |
| nϑr |
Reference speed |
22.600 1/min |
| ≈m |
Weight |
0,035 kg |
| da min |
Minimum diameter of shaft shoulder |
14,2 mm |
| Da max |
Maximum diameter of housing shoulder |
25,8 mm |
| Db max |
Maximum diameter of housing shoulder |
27,6 mm |
| ra max |
Maximum fillet radius of shaft |
0,6 mm |
| ra1 max |
Maximum fillet radius of housing |
0,3 mm |
| rmin |
Minimum chamfer dimension |
0,6 mm |
| r1 min |
Minimum chamfer dimension |
0,3 mm |
| D1 |
Shoulder diameter on outer ring wide side face |
22 mm |
| d1 |
Shoulder diameter on inner ring wide side face |
18,3 mm |
| a |
Distance between the apexes of the pressure cones |
13 mm |
| α |
Contact angle |
40 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
150 °C |
| Amin |
Axial clearance per set min. |
22 µm |
| Tol(+) |
Tolerance for axial clearance or preload per set |
8 µm |
| Design variant |
Design variant B |
B |
| Sealing |
not sealed |
Without |
| Cage |
steel sheet metal |
JP |
| Tolerance class |
Class6 (P6), better than PN |
P6 |
| Bearing with matched conditions for fitting in pairs |
bearing set with small axial internal clearance |
UA |
| Lubricant |
Bearing not greased. |
Without |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
+36704288344
HU
EN
