Product number:

7202-B-XL-2RS-TVP-P5-UL

Brand:

Product name:

bearing

Replacements:

7202-B-2RS-TVP-P5-UL

Inquiry Subscribe

7202-B-XL-2RS-TVP-P5-UL FAG

d	Bore diameter	15 mm
D	Outside diameter	35 mm
B	Width	11 mm
Cr	Basic dynamic load rating, radial	8.900 N
C0r	Basic static load rating, radial	4.450 N
Cur	Fatigue load limit, radial	305 N
nG	Limiting speed	12.800 1/min
≈m	Weight	0,046 kg
da min	Minimum diameter of shaft shoulder	19,2 mm
Da max	Maximum diameter of housing shoulder	30,8 mm
Db max	Maximum diameter of housing shoulder	32,6 mm
ra max	Maximum fillet radius of shaft	0,6 mm
ra1 max	Maximum fillet radius of housing	0,3 mm
rmin	Minimum chamfer dimension	0,6 mm
r1 min	Minimum chamfer dimension	0,3 mm
D1	Shoulder diameter on outer ring wide side face	27,6 mm
D2	Caliber diameter on outer ring wide side face	29,2 mm
D3	Caliber diameter on outer ring small side face	32,1 mm
d1	Shoulder diameter on inner ring wide side face	22,8 mm
d2	Caliber diameter on inner ring wide side face	19,7 mm
a	Distance between the apexes of the pressure cones	16 mm
α	Contact angle	40 °
Tmin	Operating temperature min.	-20 °C
Tmax	Operating temperature max.	100 °C
Vmax	Preload per set max.	-4 µm
Tol(+)	Tolerance for axial clearance or preload per set	6 µm
FV max	Preload force	62 N
Design variant	Design variant B	B
Sealing	Contact seal on both sides	2RS
Cage	solid cage made of glass-fiber reinforced polyamid PA66, ball guided	TVP
Tolerance class	Class5 (P5), better than P6	P5
Bearing with matched conditions for fitting in pairs	bearing set with light preload	UL
Lubricant	ball bearing grease, low noise for D<=62mm	GA14
Dimensional / heat stabilization	Rings dimensional stabilized up to 150°	S0