| d |
Bore diameter |
17 mm |
| D |
Outside diameter |
35 mm |
| B |
Width |
14 mm |
| Cr |
Basic dynamic load rating, radial |
9.100 N |
| C0r |
Basic static load rating, radial |
6.100 N |
| Cur |
Fatigue load limit, radial |
315 N |
| nG |
Limiting speed |
12.300 1/min |
| ≈m |
Weight |
0,057 kg |
| da min |
Minimum diameter shaft shoulder |
19 mm |
| Da max |
Maximum diameter of housing shoulder |
33 mm |
| ra max |
Maximum fillet radius |
0,3 mm |
| rmin |
Minimum chamfer dimension |
0,3 mm |
| D2 |
Caliber diameter outer ring |
29,8 mm |
| d2 |
Caliber diamter inner ring |
21 mm |
| a |
Distance between the apexes of the pressure cones |
17,1 mm |
| α |
Contact angle |
25 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
100 °C |
| Lubricant |
Grease (L237/customer specific) |
L237 |
| Sealing |
Contact seal on both sides |
2RS |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66 |
TVH |
| Tolerance class |
Normal (PN) |
PN |
| Axial internal clearance |
Group 3 (C3), bigger than CN |
C3 |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 120° |
SN |
| Design variant |
Design variant B |
B |
+36704288344
HU
EN
