Product details from catalogue Inquiry

Drawings:

HC7000-E-T-P4S-UL FAG

High speed spindle bearings HC70..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, restricted tolerances


d Bore diameter 10 mm
D Outside diameter 26 mm
B Width 8 mm
Cr Basic dynamic load rating, radial 2.360 N
C0r Basic static load rating, radial 860 N
Cur Fatigue load limit, radial 69 N
nG Grease Limiting speed for grease lubrication 110.000 1/min
nG Oil Limiting speed for oil lubrication 160.000 1/min
≈m Weight 20,8 g
da Diameter shaft shoulder 14 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 22 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 0,3 mm
ra1 max Maximum recess radius 0,1 mm
Etk min Minimum diameter injection pitch 16,4 mm
Etk max Maximum diameter injection pitch 16,9 mm
Etk1 min Minimum diameter injection pitch 15,3 mm
Etk1 max Maximum diameter injection pitch 16,9 mm
a Distance between the apexes of the pressure cones 8,2 mm
rmin Minimum chamfer dimension 0,3 mm
r1 min Minimum chamfer dimension 0,3 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 10 N
FV M Preload force medium 31 N
FV H Preload force heavy 62 N
KaE L Lift-off force light 30 N
KaE M Lift-off force medium 91 N
KaE H Lift-off force heavy 185 N
ca L Axial rigidity light 26,6 N/µm
ca M Axial rigidity medium 39,5 N/µm
ca H Axial rigidity heavy 51,4 N/µm
Contact angle Contact angle 25° E
Lubricant Without
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard