Product details from catalogue Inquiry

Drawings:

HCS71900-E-T-P4S-UL FAG

Spindle bearings HCS719..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, lip seals on both sides, non-contact, restricted tolerances

Replacements: HCS71900E.T.P4S.UL


d Bore diameter 10 mm
D Outside diameter 22 mm
B Width 6 mm
Cr Basic dynamic load rating, radial 1.700 N
C0r Basic static load rating, radial 600 N
Cur Fatigue load limit, radial 48 N
nG Grease Limiting speed for grease lubrication 120.000 1/min
≈m Weight 11,5 g
da Diameter shaft shoulder 13 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 19,5 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 0,3 mm
ra1 max Maximum recess radius 0,1 mm
a Distance between the apexes of the pressure cones 6,7 mm
rmin Minimum chamfer dimension 0,3 mm
r1 min Minimum chamfer dimension 0,3 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 80 °C
FV L Preload force light 7 N
FV M Preload force medium 22 N
FV H Preload force heavy 45 N
KaE L Lift-off force light 21 N
KaE M Lift-off force medium 65 N
KaE H Lift-off force heavy 133 N
ca L Axial rigidity light 21,6 N/µm
ca M Axial rigidity medium 32 N/µm
ca H Axial rigidity heavy 41,7 N/µm
Contact angle Contact angle 25° E
Sealing 2RSD 2RSD
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard