HS71900-C-T-P4S-UL FAG Catalog

Spindle bearings HS719..-C, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances

d	Bore diameter	10 mm
D	Outside diameter	22 mm
B	Width	6 mm
Cr	Basic dynamic load rating, radial	1.790 N
C0r	Basic static load rating, radial	650 N
Cur	Fatigue load limit, radial	69 N
nG Grease	Limiting speed for grease lubrication	100.000 1/min
nG Oil	Limiting speed for oil lubrication	160.000 1/min
≈m	Weight	10 g
da	Diameter shaft shoulder	13 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	19,5 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	0,3 mm
ra1 max	Maximum recess radius	0,1 mm
Etk min	Minimum diameter injection pitch	14,6 mm
Etk max	Maximum diameter injection pitch	15 mm
Etk1 min	Minimum diameter injection pitch	13,7 mm
Etk1 max	Maximum diameter injection pitch	15 mm
a	Distance between the apexes of the pressure cones	5,1 mm
rmin	Minimum chamfer dimension	0,3 mm
r1 min	Minimum chamfer dimension	0,3 mm
α	Contact angle	15 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	7 N
FV M	Preload force medium	20 N
FV H	Preload force heavy	39 N
KaE L	Lift-off force light	20 N
KaE M	Lift-off force medium	63 N
KaE H	Lift-off force heavy	132 N
ca L	Axial rigidity light	8,8 N/µm
ca M	Axial rigidity medium	14,1 N/µm
ca H	Axial rigidity heavy	19,6 N/µm
Contact angle	Contact angle 15°	C
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L