HSS7000-C-T-P4S-UL FAG Catalog

Spindle bearings HSS70..-C, adjusted, in pairs or sets, contact angle ? = 15°, lip seals on both sides, non-contact, restricted tolerances

Replacements: HSS7000C.T.P4S.UL

d	Bore diameter	10 mm
D	Outside diameter	26 mm
B	Width	8 mm
Cr	Basic dynamic load rating, radial	2.470 N
C0r	Basic static load rating, radial	940 N
Cur	Fatigue load limit, radial	99 N
nG Grease	Limiting speed for grease lubrication	90.000 1/min
≈m	Weight	23 g
da	Diameter shaft shoulder	14 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	22 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	0,3 mm
ra1 max	Maximum recess radius	0,1 mm
a	Distance between the apexes of the pressure cones	6,4 mm
rmin	Minimum chamfer dimension	0,3 mm
r1 min	Minimum chamfer dimension	0,3 mm
α	Contact angle	15 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	80 °C
FV L	Preload force light	9 N
FV M	Preload force medium	28 N
FV H	Preload force heavy	55 N
KaE L	Lift-off force light	28 N
KaE M	Lift-off force medium	89 N
KaE H	Lift-off force heavy	185 N
ca L	Axial rigidity light	10,9 N/µm
ca M	Axial rigidity medium	17,4 N/µm
ca H	Axial rigidity heavy	24,1 N/µm
Contact angle	Contact angle 15°	C
Sealing	Contact lip seal on both sides	2RSD
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L