HS7001-C-T-P4S-UL FAG Catalog

Spindle bearings HS70..-C, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances

d	Bore diameter	12 mm
D	Outside diameter	28 mm
B	Width	8 mm
Cr	Basic dynamic load rating, radial	2.450 N
C0r	Basic static load rating, radial	960 N
Cur	Fatigue load limit, radial	102 N
nG Grease	Limiting speed for grease lubrication	80.000 1/min
nG Oil	Limiting speed for oil lubrication	130.000 1/min
≈m	Weight	23 g
da	Diameter shaft shoulder	16,5 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	24,5 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	0,3 mm
ra1 max	Maximum recess radius	0,1 mm
Etk min	Minimum diameter injection pitch	18,4 mm
Etk max	Maximum diameter injection pitch	18,9 mm
Etk1 min	Minimum diameter injection pitch	17,3 mm
Etk1 max	Maximum diameter injection pitch	18,9 mm
a	Distance between the apexes of the pressure cones	6,7 mm
rmin	Minimum chamfer dimension	0,3 mm
r1 min	Minimum chamfer dimension	0,3 mm
α	Contact angle	15 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	9 N
FV M	Preload force medium	27 N
FV H	Preload force heavy	54 N
KaE L	Lift-off force light	27 N
KaE M	Lift-off force medium	87 N
KaE H	Lift-off force heavy	181 N
ca L	Axial rigidity light	10,8 N/µm
ca M	Axial rigidity medium	17,3 N/µm
ca H	Axial rigidity heavy	23,9 N/µm
Contact angle	Contact angle 15°	C
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L