Product details from catalogue Inquiry

Drawings:

HS7002-C-T-P4S-UL FAG

Spindle bearings HS70..-C, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances


d Bore diameter 15 mm
D Outside diameter 32 mm
B Width 9 mm
Cr Basic dynamic load rating, radial 3.450 N
C0r Basic static load rating, radial 1.480 N
Cur Fatigue load limit, radial 157 N
nG Grease Limiting speed for grease lubrication 70.000 1/min
nG Oil Limiting speed for oil lubrication 110.000 1/min
≈m Weight 32 g
da Diameter shaft shoulder 19 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 29 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 0,3 mm
ra1 max Maximum recess radius 0,1 mm
Etk min Minimum diameter injection pitch 21,6 mm
Etk max Maximum diameter injection pitch 22,4 mm
Etk1 min Minimum diameter injection pitch 20,4 mm
Etk1 max Maximum diameter injection pitch 22,4 mm
a Distance between the apexes of the pressure cones 7,6 mm
rmin Minimum chamfer dimension 0,3 mm
r1 min Minimum chamfer dimension 0,3 mm
α Contact angle 15 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 13 N
FV M Preload force medium 38 N
FV H Preload force heavy 75 N
KaE L Lift-off force light 38 N
KaE M Lift-off force medium 120 N
KaE H Lift-off force heavy 251 N
ca L Axial rigidity light 13,7 N/µm
ca M Axial rigidity medium 21,8 N/µm
ca H Axial rigidity heavy 30,2 N/µm
Contact angle Contact angle 15° C
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L