HSS7002-E-T-P4S-UL FAG Catalog

Spindle bearings HSS70..-E, adjusted, in pairs or sets, contact angle ? = 25°, lip seals on both sides, non-contact, restricted tolerances

Replacements: HSS7002E.T.P4S.UL

d	Bore diameter	15 mm
D	Outside diameter	32 mm
B	Width	9 mm
Cr	Basic dynamic load rating, radial	3.250 N
C0r	Basic static load rating, radial	1.410 N
Cur	Fatigue load limit, radial	149 N
nG Grease	Limiting speed for grease lubrication	63.000 1/min
≈m	Weight	36 g
da	Diameter shaft shoulder	19 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	29 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	0,3 mm
ra1 max	Maximum recess radius	0,1 mm
a	Distance between the apexes of the pressure cones	10 mm
rmin	Minimum chamfer dimension	0,3 mm
r1 min	Minimum chamfer dimension	0,3 mm
α	Contact angle	25 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	80 °C
FV L	Preload force light	20 N
FV M	Preload force medium	61 N
FV H	Preload force heavy	122 N
KaE L	Lift-off force light	59 N
KaE M	Lift-off force medium	182 N
KaE H	Lift-off force heavy	372 N
ca L	Axial rigidity light	34 N/µm
ca M	Axial rigidity medium	50,9 N/µm
ca H	Axial rigidity heavy	66,8 N/µm
Contact angle	Contact angle 25°	E
Sealing	Contact lip seal on both sides	2RSD
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L