HSS71902-E-T-P4S-UL FAG Catalog

Spindle bearings HSS719..-E, adjusted, in pairs or sets, contact angle ? = 25°, lip seals on both sides, non-contact, restricted tolerances

Replacements: HSS71902E.T.P4S.UL

d	Bore diameter	15 mm
D	Outside diameter	28 mm
B	Width	7 mm
Cr	Basic dynamic load rating, radial	2.410 N
C0r	Basic static load rating, radial	990 N
Cur	Fatigue load limit, radial	105 N
nG Grease	Limiting speed for grease lubrication	67.000 1/min
≈m	Weight	18,7 g
da	Diameter shaft shoulder	18 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	25,5 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	0,3 mm
ra1 max	Maximum recess radius	0,1 mm
a	Distance between the apexes of the pressure cones	8,5 mm
rmin	Minimum chamfer dimension	0,3 mm
r1 min	Minimum chamfer dimension	0,3 mm
α	Contact angle	25 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	80 °C
FV L	Preload force light	15 N
FV M	Preload force medium	46 N
FV H	Preload force heavy	91 N
KaE L	Lift-off force light	44 N
KaE M	Lift-off force medium	136 N
KaE H	Lift-off force heavy	278 N
ca L	Axial rigidity light	28,3 N/µm
ca M	Axial rigidity medium	42,4 N/µm
ca H	Axial rigidity heavy	55,6 N/µm
Contact angle	Contact angle 25°	E
Sealing	Contact lip seal on both sides	2RSD
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L