Product details from catalogue Inquiry

Drawings:

HS7003-C-T-P4S-UL FAG

Spindle bearings HS70..-C, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances

Replacements: HS7003C.T.P4.UL, HS7003C.T.P4S.UL


d Bore diameter 17 mm
D Outside diameter 35 mm
B Width 10 mm
Cr Basic dynamic load rating, radial 3.550 N
C0r Basic static load rating, radial 1.600 N
Cur Fatigue load limit, radial 170 N
nG Grease Limiting speed for grease lubrication 63.000 1/min
nG Oil Limiting speed for oil lubrication 95.000 1/min
≈m Weight 42 g
da Diameter shaft shoulder 21 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 32 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 0,3 mm
ra1 max Maximum recess radius 0,1 mm
Etk min Minimum diameter injection pitch 24,1 mm
Etk max Maximum diameter injection pitch 24,8 mm
Etk1 min Minimum diameter injection pitch 22,9 mm
Etk1 max Maximum diameter injection pitch 24,8 mm
a Distance between the apexes of the pressure cones 8,5 mm
rmin Minimum chamfer dimension 0,3 mm
r1 min Minimum chamfer dimension 0,3 mm
α Contact angle 15 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 13 N
FV M Preload force medium 38 N
FV H Preload force heavy 76 N
KaE L Lift-off force light 38 N
KaE M Lift-off force medium 121 N
KaE H Lift-off force heavy 253 N
ca L Axial rigidity light 14,3 N/µm
ca M Axial rigidity medium 22,7 N/µm
ca H Axial rigidity heavy 31,3 N/µm
Contact angle Contact angle 15° C
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L