Product details from catalogue Inquiry
XC7003-E-T-P4S-UL FAG
Spindle bearings XC70..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, restricted tolerances, with Cronidur rings
d | Bore diameter | 17 mm |
D | Outside diameter | 35 mm |
B | Width | 10 mm |
Cr | Basic dynamic load rating, radial | 5.100 N |
C0r | Basic static load rating, radial | 1.460 N |
Cur | Fatigue load limit, radial | 117 N |
nG Grease | Limiting speed for grease lubrication | 80.000 1/min |
nG Oil | Limiting speed for oil lubrication | 120.000 1/min |
≈m | Weight | 41,6 g |
da | Diameter shaft shoulder | 21 mm |
da | Diameter shaft shoulder clearance | h12 |
Da | Shoulder diameter outer ring | 32 mm |
Da | Shoulder diameter outer ring clearance | H12 |
ra max | Maximum recess radius | 0,3 mm |
ra1 max | Maximum recess radius | 0,1 mm |
Etk min | Minimum diameter injection pitch | 24,1 mm |
Etk max | Maximum diameter injection pitch | 24,8 mm |
Etk1 min | Minimum diameter injection pitch | 22,9 mm |
Etk1 max | Maximum diameter injection pitch | 24,8 mm |
a | Distance between the apexes of the pressure cones | 11,1 mm |
rmin | Minimum chamfer dimension | 0,3 mm |
r1 min | Minimum chamfer dimension | 0,3 mm |
α | Contact angle | 25 ° |
Tmin | Operating temperature min. | -30 °C |
Tmax | Operating temperature max. | 100 °C |
FV L | Preload force light | 14 N |
FV M | Preload force medium | 43 N |
FV H | Preload force heavy | 86 N |
KaE L | Lift-off force light | 41 N |
KaE M | Lift-off force medium | 126 N |
KaE H | Lift-off force heavy | 256 N |
ca L | Axial rigidity light | 35,3 N/µm |
ca M | Axial rigidity medium | 52,2 N/µm |
ca H | Axial rigidity heavy | 67,7 N/µm |
Contact angle | Contact angle 25° | E |
Lubricant | Without | |
Sealing | Without | |
Outer shape | Standard | |
Cage | Laminated fabric cage | T |
Tolerance class | tolerance class P4S, FAG standard better than P4 to DIN 620 | P4S |
Arrangement bearing set | Single bearing | U |
Preload | preload light | L |
Changed internal design | Standard |