Product details from catalogue Inquiry

Drawings:

HS71905-E-T-P4S-UL FAG

Spindle bearings HS719..-E, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances


d Bore diameter 25 mm
D Outside diameter 42 mm
B Width 9 mm
Cr Basic dynamic load rating, radial 3.650 N
C0r Basic static load rating, radial 1.950 N
Cur Fatigue load limit, radial 206 N
nG Grease Limiting speed for grease lubrication 43.000 1/min
nG Oil Limiting speed for oil lubrication 67.000 1/min
≈m Weight 43,7 g
da Diameter shaft shoulder 29 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 38,5 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 0,3 mm
ra1 max Maximum recess radius 0,15 mm
Etk min Minimum diameter injection pitch 31,6 mm
Etk max Maximum diameter injection pitch 32,2 mm
Etk1 min Minimum diameter injection pitch 30,4 mm
Etk1 max Maximum diameter injection pitch 32,2 mm
a Distance between the apexes of the pressure cones 12,3 mm
rmin Minimum chamfer dimension 0,3 mm
r1 min Minimum chamfer dimension 0,3 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 23 N
FV M Preload force medium 69 N
FV H Preload force heavy 138 N
KaE L Lift-off force light 66 N
KaE M Lift-off force medium 204 N
KaE H Lift-off force heavy 416 N
ca L Axial rigidity light 42,2 N/µm
ca M Axial rigidity medium 63,1 N/µm
ca H Axial rigidity heavy 82,4 N/µm
Contact angle Contact angle 25° E
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L