HCM7006-C-T-P4S-UL-XL FAG Catalog

High speed spindle bearing HCM70..-C, adjusted, in pairs or sets, contact angle ? = 17°, with ceramic balls, restricted tolerances

d	Bore diameter	30 mm
D	Outside diameter	55 mm
B	Width	13 mm
Cr	Basic dynamic load rating, radial	8.900 N
C0r	Basic static load rating, radial	3.900 N
Cur	Fatigue load limit, radial	315 N
nG Grease	Limiting speed for grease lubrication	48.300 1/min
nG Oil	Limiting speed for oil lubrication	70.600 1/min
≈m	Weight	108,3 g
da	Diameter shaft shoulder	36 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	49 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	1 mm
ra1 max	Maximum recess radius	0,3 mm
Etk min	Minimum diameter injection pitch	39,2 mm
Etk max	Maximum diameter injection pitch	40,9 mm
Etk1 min	Minimum diameter injection pitch	37,1 mm
Etk1 max	Maximum diameter injection pitch	40,9 mm
a	Distance between the apexes of the pressure cones	13 mm
rmin	Minimum chamfer dimension	1 mm
r1 min	Minimum chamfer dimension	0,6 mm
α	Contact angle	17 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	30 N
FV M	Preload force medium	79 N
FV H	Preload force heavy	166 N
KaE L	Lift-off force light	87 N
KaE M	Lift-off force medium	235 N
KaE H	Lift-off force heavy	507 N
ca L	Axial rigidity light	29 N/µm
ca M	Axial rigidity medium	42 N/µm
ca H	Axial rigidity heavy	56 N/µm
Contact angle	Contact angle 17°	C
Lubricant		Without
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L
Changed internal design		Standard