Product details from catalogue Inquiry

Drawings:

VCM7006-CDLR-T-P4S-UL-XL FAG

High speed spindle bearings VCM70..-CDLR, adjusted, matched pairs or sets, contact angle ? = 17°, with ceramic balls, rings made from Vacrodur, restricted tolerances, for direct oil feed via outer ring, with inserted O rings


d Bore diameter 30 mm
D Outside diameter 55 mm
B Width 13 mm
Cr Basic dynamic load rating, radial 21.400 N
C0r Basic static load rating, radial 5.400 N
Cur Fatigue load limit, radial 275 N
nG Grease Limiting speed for grease lubrication 49.500 1/min
nG Oil Limiting speed for oil lubrication 77.700 1/min
≈m Weight 55,65 g
da Diameter shaft shoulder 36 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 49 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,3 mm
BN Distance ring grooves 2,4 mm
BN1 Distance ring grooves 2,4 mm
SN Distance to lubrication hole 7,4 mm
SB Width of lubricating groove 1 mm
a Distance between the apexes of the pressure cones 13 mm
rmin Minimum chamfer dimension 1 mm
r1 min Minimum chamfer dimension 0,6 mm
α Contact angle 17 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 27 N
FV M Preload force medium 71 N
FV H Preload force heavy 148 N
KaE L Lift-off force light 78 N
KaE M Lift-off force medium 210 N
KaE H Lift-off force heavy 450 N
ca L Axial rigidity light 29 N/µm
ca M Axial rigidity medium 41 N/µm
ca H Axial rigidity heavy 55 N/µm
Contact angle Contact angle 17° C
Lubricant Without
Sealing Without
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard