Product details from catalogue Inquiry

Drawings:

VCM7006-E-T-P4S-UL-XL FAG

High speed spindle bearings VCM70..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, rings made from Vacrodur, restricted tolerances


d Bore diameter 30 mm
D Outside diameter 55 mm
B Width 13 mm
Cr Basic dynamic load rating, radial 20.400 N
C0r Basic static load rating, radial 5.200 N
Cur Fatigue load limit, radial 265 N
nG Grease Limiting speed for grease lubrication 47.100 1/min
nG Oil Limiting speed for oil lubrication 70.600 1/min
≈m Weight 111,74 g
da Diameter shaft shoulder 36 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 49 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,3 mm
Etk min Minimum diameter injection pitch 39,2 mm
Etk max Maximum diameter injection pitch 40,9 mm
Etk1 min Minimum diameter injection pitch 37,1 mm
Etk1 max Maximum diameter injection pitch 40,9 mm
a Distance between the apexes of the pressure cones 16,4 mm
rmin Minimum chamfer dimension 1 mm
r1 min Minimum chamfer dimension 0,6 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 39 N
FV M Preload force medium 102 N
FV H Preload force heavy 211 N
KaE L Lift-off force light 111 N
KaE M Lift-off force medium 293 N
KaE H Lift-off force heavy 616 N
ca L Axial rigidity light 59 N/µm
ca M Axial rigidity medium 83 N/µm
ca H Axial rigidity heavy 108 N/µm
Contact angle Contact angle 25° E
Lubricant Without
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard