HCM7007-E-T-P4S-UL-XL FAG Catalog

High speed spindle bearing HCM70..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, restricted tolerances

d	Bore diameter	35 mm
D	Outside diameter	62 mm
B	Width	14 mm
Cr	Basic dynamic load rating, radial	10.800 N
C0r	Basic static load rating, radial	4.850 N
Cur	Fatigue load limit, radial	390 N
nG Grease	Limiting speed for grease lubrication	40.300 1/min
nG Oil	Limiting speed for oil lubrication	57.800 1/min
≈m	Weight	140,3 g
da	Diameter shaft shoulder	41 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	56 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	1 mm
ra1 max	Maximum recess radius	0,3 mm
Etk min	Minimum diameter injection pitch	44,7 mm
Etk max	Maximum diameter injection pitch	46,6 mm
Etk1 min	Minimum diameter injection pitch	42,3 mm
Etk1 max	Maximum diameter injection pitch	46,6 mm
a	Distance between the apexes of the pressure cones	18,3 mm
rmin	Minimum chamfer dimension	1 mm
r1 min	Minimum chamfer dimension	0,6 mm
α	Contact angle	25 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	57 N
FV M	Preload force medium	148 N
FV H	Preload force heavy	308 N
KaE L	Lift-off force light	162 N
KaE M	Lift-off force medium	428 N
KaE H	Lift-off force heavy	901 N
ca L	Axial rigidity light	68 N/µm
ca M	Axial rigidity medium	95 N/µm
ca H	Axial rigidity heavy	124 N/µm
Contact angle	Contact angle 25°	E
Lubricant		Without
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L
Changed internal design		Standard