Product details from catalogue Inquiry

Drawings:

HCS7007-E-T-P4S-UL FAG

Spindle bearings HCS70..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, lip seals on both sides, non-contact, restricted tolerances


d Bore diameter 35 mm
D Outside diameter 62 mm
B Width 14 mm
Cr Basic dynamic load rating, radial 8.400 N
C0r Basic static load rating, radial 4.500 N
Cur Fatigue load limit, radial 365 N
nG Grease Limiting speed for grease lubrication 38.000 1/min
≈m Weight 0,16 kg
da Diameter shaft shoulder 41 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 56 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,3 mm
a Distance between the apexes of the pressure cones 18,3 mm
rmin Minimum chamfer dimension 1 mm
r1 min Minimum chamfer dimension 1 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 80 °C
FV L Preload force light 35 N
FV M Preload force medium 105 N
FV H Preload force heavy 210 N
KaE L Lift-off force light 101 N
KaE M Lift-off force medium 307 N
KaE H Lift-off force heavy 623 N
ca L Axial rigidity light 67,3 N/µm
ca M Axial rigidity medium 99,5 N/µm
ca H Axial rigidity heavy 129 N/µm
Contact angle Contact angle 25° E
Sealing 2RSD 2RSD
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard