Product details from catalogue Inquiry

Drawings:

HS71907-E-T-P4S-UL FAG

Spindle bearings HS719..-E, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances


d Bore diameter 35 mm
D Outside diameter 55 mm
B Width 10 mm
Cr Basic dynamic load rating, radial 6.100 N
C0r Basic static load rating, radial 3.600 N
Cur Fatigue load limit, radial 380 N
nG Grease Limiting speed for grease lubrication 32.000 1/min
nG Oil Limiting speed for oil lubrication 50.000 1/min
≈m Weight 76,08 g
da Diameter shaft shoulder 40 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 51,5 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 0,6 mm
ra1 max Maximum recess radius 0,15 mm
Etk min Minimum diameter injection pitch 42,6 mm
Etk max Maximum diameter injection pitch 43,4 mm
Etk1 min Minimum diameter injection pitch 41,2 mm
Etk1 max Maximum diameter injection pitch 43,4 mm
a Distance between the apexes of the pressure cones 15,5 mm
rmin Minimum chamfer dimension 0,6 mm
r1 min Minimum chamfer dimension 0,6 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 38 N
FV M Preload force medium 113 N
FV H Preload force heavy 226 N
KaE L Lift-off force light 109 N
KaE M Lift-off force medium 333 N
KaE H Lift-off force heavy 680 N
ca L Axial rigidity light 61 N/µm
ca M Axial rigidity medium 91,1 N/µm
ca H Axial rigidity heavy 119 N/µm
Contact angle Contact angle 25° E
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L