Product details from catalogue Inquiry

Drawings:

VCM7010-C-T-P4S-UL-XL FAG

High speed spindle bearings VCM70..-C, adjusted, in pairs or sets, contact angle ? = 17°, with ceramic balls, rings made from Vacrodur, restricted tolerances


d Bore diameter 50 mm
D Outside diameter 80 mm
B Width 16 mm
Cr Basic dynamic load rating, radial 31.500 N
C0r Basic static load rating, radial 9.900 N
Cur Fatigue load limit, radial 500 N
nG Grease Limiting speed for grease lubrication 32.400 1/min
nG Oil Limiting speed for oil lubrication 50.800 1/min
≈m Weight 259,1 g
da Diameter shaft shoulder 56 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 74 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,3 mm
Etk min Minimum diameter injection pitch 61,2 mm
Etk max Maximum diameter injection pitch 63 mm
Etk1 min Minimum diameter injection pitch 58,8 mm
Etk1 max Maximum diameter injection pitch 63 mm
a Distance between the apexes of the pressure cones 17,9 mm
rmin Minimum chamfer dimension 1 mm
r1 min Minimum chamfer dimension 0,6 mm
α Contact angle 17 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 49 N
FV M Preload force medium 129 N
FV H Preload force heavy 271 N
KaE L Lift-off force light 143 N
KaE M Lift-off force medium 384 N
KaE H Lift-off force heavy 825 N
ca L Axial rigidity light 45 N/µm
ca M Axial rigidity medium 64 N/µm
ca H Axial rigidity heavy 86 N/µm
Contact angle Contact angle 17° C
Lubricant Without
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard