Product details from catalogue Inquiry

Drawings:

HC7011-EDLR-T-P4S-UL FAG

High speed spindle bearings HC70..-EDLR, Adjusted, matched pairs or sets, contact angle ? = 25°, with ceramic balls, restricted tolerances, for direct oil feed via outer ring, with inserted O rings


d Bore diameter 55 mm
D Outside diameter 90 mm
B Width 18 mm
Cr Basic dynamic load rating, radial 17.000 N
C0r Basic static load rating, radial 10.400 N
Cur Fatigue load limit, radial 840 N
nG Grease Limiting speed for grease lubrication 26.000 1/min
nG Oil Limiting speed for oil lubrication 40.000 1/min
≈m Weight 0,364 kg
da Diameter shaft shoulder 62 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 83 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,6 mm
BN Distance ring grooves 4,3 mm
SN Distance to lubrication hole 9,7 mm
SB Width of lubricating groove 1,4 mm
a Distance between the apexes of the pressure cones 25,9 mm
rmin Minimum chamfer dimension 1,1 mm
r1 min Minimum chamfer dimension 1,1 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 70 N
FV M Preload force medium 210 N
FV H Preload force heavy 421 N
KaE L Lift-off force light 201 N
KaE M Lift-off force medium 613 N
KaE H Lift-off force heavy 1.244 N
ca L Axial rigidity light 105 N/µm
ca M Axial rigidity medium 155 N/µm
ca H Axial rigidity heavy 201 N/µm
Contact angle Contact angle 25° E
Lubricant Without
Sealing Without
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard