HS71912-C-T-P4S-UL FAG Catalog

Spindle bearings HS719..-C, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances

d	Bore diameter	60 mm
D	Outside diameter	85 mm
B	Width	13 mm
Cr	Basic dynamic load rating, radial	13.400 N
C0r	Basic static load rating, radial	9.200 N
Cur	Fatigue load limit, radial	970 N
nG Grease	Limiting speed for grease lubrication	22.000 1/min
nG Oil	Limiting speed for oil lubrication	34.000 1/min
≈m	Weight	0,186 kg
da	Diameter shaft shoulder	65 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	80,5 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	0,6 mm
ra1 max	Maximum recess radius	0,3 mm
Etk min	Minimum diameter injection pitch	69,2 mm
Etk max	Maximum diameter injection pitch	70,4 mm
Etk1 min	Minimum diameter injection pitch	67,1 mm
Etk1 max	Maximum diameter injection pitch	70,4 mm
a	Distance between the apexes of the pressure cones	16,2 mm
rmin	Minimum chamfer dimension	1 mm
r1 min	Minimum chamfer dimension	1 mm
α	Contact angle	15 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	47 N
FV M	Preload force medium	141 N
FV H	Preload force heavy	281 N
KaE L	Lift-off force light	140 N
KaE M	Lift-off force medium	442 N
KaE H	Lift-off force heavy	920 N
ca L	Axial rigidity light	39,5 N/µm
ca M	Axial rigidity medium	62,1 N/µm
ca H	Axial rigidity heavy	85 N/µm
Contact angle	Contact angle 15°	C
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L