HC7013-E-T-P4S-UL FAG Catalog

High speed spindle bearings HC70..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, restricted tolerances

d	Bore diameter	65 mm
D	Outside diameter	100 mm
B	Width	18 mm
Cr	Basic dynamic load rating, radial	18.200 N
C0r	Basic static load rating, radial	12.200 N
Cur	Fatigue load limit, radial	980 N
nG Grease	Limiting speed for grease lubrication	22.000 1/min
nG Oil	Limiting speed for oil lubrication	34.000 1/min
≈m	Weight	0,424 kg
da	Diameter shaft shoulder	72 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	93 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	1 mm
ra1 max	Maximum recess radius	0,6 mm
Etk min	Minimum diameter injection pitch	78,5 mm
Etk max	Maximum diameter injection pitch	80,2 mm
Etk1 min	Minimum diameter injection pitch	75,9 mm
Etk1 max	Maximum diameter injection pitch	80,2 mm
a	Distance between the apexes of the pressure cones	28,2 mm
rmin	Minimum chamfer dimension	1,1 mm
r1 min	Minimum chamfer dimension	1,1 mm
α	Contact angle	25 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	74 N
FV M	Preload force medium	223 N
FV H	Preload force heavy	445 N
KaE L	Lift-off force light	213 N
KaE M	Lift-off force medium	647 N
KaE H	Lift-off force heavy	1.313 N
ca L	Axial rigidity light	118 N/µm
ca M	Axial rigidity medium	173 N/µm
ca H	Axial rigidity heavy	224 N/µm
Contact angle	Contact angle 25°	E
Lubricant		Without
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L
Changed internal design		Standard