Product details from catalogue Inquiry

Drawings:

HC7013-EDLR-T-P4S-UL FAG

High speed spindle bearings HC70..-EDLR, Adjusted, matched pairs or sets, contact angle ? = 25°, with ceramic balls, restricted tolerances, for direct oil feed via outer ring, with inserted O rings


d Bore diameter 65 mm
D Outside diameter 100 mm
B Width 18 mm
Cr Basic dynamic load rating, radial 18.200 N
C0r Basic static load rating, radial 12.200 N
Cur Fatigue load limit, radial 980 N
nG Grease Limiting speed for grease lubrication 22.000 1/min
nG Oil Limiting speed for oil lubrication 34.000 1/min
≈m Weight 0,409 kg
da Diameter shaft shoulder 72 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 93 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,6 mm
BN Distance ring grooves 4 mm
SN Distance to lubrication hole 10,4 mm
SB Width of lubricating groove 1,4 mm
a Distance between the apexes of the pressure cones 28,2 mm
rmin Minimum chamfer dimension 1,1 mm
r1 min Minimum chamfer dimension 1,1 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 74 N
FV M Preload force medium 223 N
FV H Preload force heavy 445 N
KaE L Lift-off force light 213 N
KaE M Lift-off force medium 647 N
KaE H Lift-off force heavy 1.313 N
ca L Axial rigidity light 118 N/µm
ca M Axial rigidity medium 173 N/µm
ca H Axial rigidity heavy 224 N/µm
Contact angle Contact angle 25° E
Lubricant Without
Sealing Without
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard