Product details from catalogue Inquiry

Drawings:

HCB7013-E-T-P4S-UL FAG

Spindle bearings HCB70..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, restricted tolerances

Replacements: HCB7013E.T.P4S.UL


d Bore diameter 65 mm
D Outside diameter 100 mm
B Width 18 mm
Cr Basic dynamic load rating, radial 39.500 N
C0r Basic static load rating, radial 23.100 N
Cur Fatigue load limit, radial 1.860 N
nG Grease Limiting speed for grease lubrication 17.000 1/min
nG Oil Limiting speed for oil lubrication 26.000 1/min
≈m Weight 356,963 g
da Diameter shaft shoulder 72 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 93 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,6 mm
Etk min Minimum diameter injection pitch 75,9 mm
Etk max Maximum diameter injection pitch 79,5 mm
Etk1 min Minimum diameter injection pitch 75,9 mm
Etk1 max Maximum diameter injection pitch 79,5 mm
a Distance between the apexes of the pressure cones 28,2 mm
rmin Minimum chamfer dimension 1,1 mm
r1 min Minimum chamfer dimension 1,1 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 137 N
FV M Preload force medium 577 N
FV H Preload force heavy 1.276 N
KaE L Lift-off force light 392 N
KaE M Lift-off force medium 1.694 N
KaE H Lift-off force heavy 3.836 N
ca L Axial rigidity light 131 N/µm
ca M Axial rigidity medium 219 N/µm
ca H Axial rigidity heavy 297 N/µm
Contact angle Contact angle 25° E
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L