HCM7013-E-T-P4S-UL-XL FAG Catalog

High speed spindle bearing HCM70..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, restricted tolerances

d	Bore diameter	65 mm
D	Outside diameter	100 mm
B	Width	18 mm
Cr	Basic dynamic load rating, radial	19.200 N
C0r	Basic static load rating, radial	11.100 N
Cur	Fatigue load limit, radial	890 N
nG Grease	Limiting speed for grease lubrication	23.700 1/min
nG Oil	Limiting speed for oil lubrication	34.000 1/min
≈m	Weight	408 g
da	Diameter shaft shoulder	72 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	93 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	1 mm
ra1 max	Maximum recess radius	0,6 mm
Etk min	Minimum diameter injection pitch	77,7 mm
Etk max	Maximum diameter injection pitch	80 mm
Etk1 min	Minimum diameter injection pitch	74,7 mm
Etk1 max	Maximum diameter injection pitch	80 mm
a	Distance between the apexes of the pressure cones	28,2 mm
rmin	Minimum chamfer dimension	1,1 mm
r1 min	Minimum chamfer dimension	0,6 mm
α	Contact angle	25 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	129 N
FV M	Preload force medium	339 N
FV H	Preload force heavy	705 N
KaE L	Lift-off force light	371 N
KaE M	Lift-off force medium	981 N
KaE H	Lift-off force heavy	2.067 N
ca L	Axial rigidity light	120 N/µm
ca M	Axial rigidity medium	169 N/µm
ca H	Axial rigidity heavy	220 N/µm
Contact angle	Contact angle 25°	E
Lubricant		Without
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L
Changed internal design		Standard