Product details from catalogue Inquiry

Drawings:

VCM71913-E-T-P4S-UL-XL FAG

High speed spindle bearings VCM719..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, rings made from Vacrodur, restricted tolerances


d Bore diameter 65 mm
D Outside diameter 90 mm
B Width 13 mm
Cr Basic dynamic load rating, radial 45.500 N
C0r Basic static load rating, radial 14.800 N
Cur Fatigue load limit, radial 750 N
nG Grease Limiting speed for grease lubrication 25.900 1/min
nG Oil Limiting speed for oil lubrication 38.800 1/min
≈m Weight 159,2 g
da Diameter shaft shoulder 70 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 85,5 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 0,6 mm
ra1 max Maximum recess radius 0,3 mm
Etk min Minimum diameter injection pitch 72,7 mm
Etk max Maximum diameter injection pitch 75 mm
Etk1 min Minimum diameter injection pitch 69,7 mm
Etk1 max Maximum diameter injection pitch 75 mm
a Distance between the apexes of the pressure cones 24,6 mm
rmin Minimum chamfer dimension 1 mm
r1 min Minimum chamfer dimension 0,6 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 111 N
FV M Preload force medium 290 N
FV H Preload force heavy 602 N
KaE L Lift-off force light 317 N
KaE M Lift-off force medium 837 N
KaE H Lift-off force heavy 1.760 N
ca L Axial rigidity light 115 N/µm
ca M Axial rigidity medium 160 N/µm
ca H Axial rigidity heavy 209 N/µm
Contact angle Contact angle 25° E
Lubricant Without
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard