HCM71914-C-T-P4S-UL-XL FAG Catalog

High speed spindle bearing HCM719..-C, adjusted, in pairs or sets, contact angle ? = 17°, with ceramic balls, restricted tolerances

d	Bore diameter	70 mm
D	Outside diameter	100 mm
B	Width	16 mm
Cr	Basic dynamic load rating, radial	27.000 N
C0r	Basic static load rating, radial	15.000 N
Cur	Fatigue load limit, radial	1.210 N
nG Grease	Limiting speed for grease lubrication	24.200 1/min
nG Oil	Limiting speed for oil lubrication	35.300 1/min
≈m	Weight	255,05 g
da	Diameter shaft shoulder	76 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	94,5 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	0,6 mm
ra1 max	Maximum recess radius	0,3 mm
Etk min	Minimum diameter injection pitch	79,3 mm
Etk max	Maximum diameter injection pitch	82,1 mm
Etk1 min	Minimum diameter injection pitch	75,7 mm
Etk1 max	Maximum diameter injection pitch	82,1 mm
a	Distance between the apexes of the pressure cones	21 mm
rmin	Minimum chamfer dimension	1 mm
r1 min	Minimum chamfer dimension	0,6 mm
α	Contact angle	17 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	116 N
FV M	Preload force medium	306 N
FV H	Preload force heavy	641 N
KaE L	Lift-off force light	337 N
KaE M	Lift-off force medium	910 N
KaE H	Lift-off force heavy	1.965 N
ca L	Axial rigidity light	65 N/µm
ca M	Axial rigidity medium	93 N/µm
ca H	Axial rigidity heavy	125 N/µm
Contact angle	Contact angle 17°	C
Lubricant		Without
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L
Changed internal design		Standard