Product details from catalogue Inquiry

Drawings:

VCM7014-CDLR-T-P4S-UL-XL FAG

High speed spindle bearings VCM70..-CDLR, adjusted, matched pairs or sets, contact angle ? = 17°, with ceramic balls, rings made from Vacrodur, restricted tolerances, for direct oil feed via outer ring, with inserted O rings


d Bore diameter 70 mm
D Outside diameter 110 mm
B Width 20 mm
Cr Basic dynamic load rating, radial 66.000 N
C0r Basic static load rating, radial 22.100 N
Cur Fatigue load limit, radial 1.130 N
nG Grease Limiting speed for grease lubrication 23.400 1/min
nG Oil Limiting speed for oil lubrication 36.700 1/min
≈m Weight 0,567 kg
da Diameter shaft shoulder 77 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 102 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,6 mm
BN Distance ring grooves 3 mm
BN1 Distance ring grooves 3 mm
SN Distance to lubrication hole 11,6 mm
SB Width of lubricating groove 1,4 mm
a Distance between the apexes of the pressure cones 23,8 mm
rmin Minimum chamfer dimension 1,1 mm
r1 min Minimum chamfer dimension 0,6 mm
α Contact angle 17 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 110 N
FV M Preload force medium 289 N
FV H Preload force heavy 605 N
KaE L Lift-off force light 318 N
KaE M Lift-off force medium 855 N
KaE H Lift-off force heavy 1.839 N
ca L Axial rigidity light 67 N/µm
ca M Axial rigidity medium 96 N/µm
ca H Axial rigidity heavy 129 N/µm
Contact angle Contact angle 17° C
Lubricant Without
Sealing Without
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard