M7015-C-T-P4S-UL-XL FAG Catalog

High speed spindle bearing M70..-C, adjusted, in pairs or sets, contact angle ? = 17°, restricted tolerances

d	Bore diameter	75 mm
D	Outside diameter	115 mm
B	Width	20 mm
Cr	Basic dynamic load rating, radial	28.000 N
C0r	Basic static load rating, radial	17.300 N
Cur	Fatigue load limit, radial	1.830 N
nG Grease	Limiting speed for grease lubrication	17.400 1/min
nG Oil	Limiting speed for oil lubrication	26.400 1/min
≈m	Weight	0,65 kg
da	Diameter shaft shoulder	82 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	107 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	1,1 mm
ra1 max	Maximum recess radius	0,6 mm
Etk min	Minimum diameter injection pitch	89,3 mm
Etk max	Maximum diameter injection pitch	92,1 mm
Etk1 min	Minimum diameter injection pitch	85,7 mm
Etk1 max	Maximum diameter injection pitch	92,1 mm
a	Distance between the apexes of the pressure cones	24,5 mm
rmin	Minimum chamfer dimension	1,1 mm
r1 min	Minimum chamfer dimension	0,6 mm
α	Contact angle	17 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	182 N
FV M	Preload force medium	483 N
FV H	Preload force heavy	1.017 N
KaE L	Lift-off force light	536 N
KaE M	Lift-off force medium	1.467 N
KaE H	Lift-off force heavy	3.214 N
ca L	Axial rigidity light	71 N/µm
ca M	Axial rigidity medium	105 N/µm
ca H	Axial rigidity heavy	143 N/µm
Contact angle	Contact angle 17°	C
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L