M7016-E-T-P4S-UL-XL FAG Catalog

High speed spindle bearing M70..-E, adjusted, in pairs or sets, contact angle ? = 25°, restricted tolerances

d	Bore diameter	80 mm
D	Outside diameter	125 mm
B	Width	22 mm
Cr	Basic dynamic load rating, radial	32.500 N
C0r	Basic static load rating, radial	21.700 N
Cur	Fatigue load limit, radial	2.270 N
nG Grease	Limiting speed for grease lubrication	15.200 1/min
nG Oil	Limiting speed for oil lubrication	22.500 1/min
≈m	Weight	0,87 kg
da	Diameter shaft shoulder	88 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	117 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	1,1 mm
ra1 max	Maximum recess radius	0,6 mm
Etk min	Minimum diameter injection pitch	96,3 mm
Etk max	Maximum diameter injection pitch	99,6 mm
Etk1 min	Minimum diameter injection pitch	92,4 mm
Etk1 max	Maximum diameter injection pitch	99,6 mm
a	Distance between the apexes of the pressure cones	34,9 mm
rmin	Minimum chamfer dimension	1,1 mm
r1 min	Minimum chamfer dimension	0,6 mm
α	Contact angle	25 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	345 N
FV M	Preload force medium	907 N
FV H	Preload force heavy	1.895 N
KaE L	Lift-off force light	996 N
KaE M	Lift-off force medium	2.668 N
KaE H	Lift-off force heavy	5.705 N
ca L	Axial rigidity light	164 N/µm
ca M	Axial rigidity medium	234 N/µm
ca H	Axial rigidity heavy	311 N/µm
Contact angle	Contact angle 25°	E
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L