Product details from catalogue Inquiry

Drawings:

HS71917-E-T-P4S-UL FAG

Spindle bearings HS719..-E, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances


d Bore diameter 85 mm
D Outside diameter 120 mm
B Width 18 mm
Cr Basic dynamic load rating, radial 20.000 N
C0r Basic static load rating, radial 16.000 N
Cur Fatigue load limit, radial 1.670 N
nG Grease Limiting speed for grease lubrication 14.000 1/min
nG Oil Limiting speed for oil lubrication 22.000 1/min
≈m Weight 0,6 kg
da Diameter shaft shoulder 92 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 114 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 0,6 mm
ra1 max Maximum recess radius 0,6 mm
Etk min Minimum diameter injection pitch 98,5 mm
Etk max Maximum diameter injection pitch 99,9 mm
Etk1 min Minimum diameter injection pitch 96 mm
Etk1 max Maximum diameter injection pitch 99,9 mm
a Distance between the apexes of the pressure cones 32,9 mm
rmin Minimum chamfer dimension 1,1 mm
r1 min Minimum chamfer dimension 1,1 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 117 N
FV M Preload force medium 352 N
FV H Preload force heavy 704 N
KaE L Lift-off force light 338 N
KaE M Lift-off force medium 1.032 N
KaE H Lift-off force heavy 2.102 N
ca L Axial rigidity light 140 N/µm
ca M Axial rigidity medium 208 N/µm
ca H Axial rigidity heavy 270 N/µm
Contact angle Contact angle 25° E
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L