HSS71920-C-T-P4S-UL FAG Catalog

Spindle bearings HSS719..-C, adjusted, in pairs or sets, contact angle ? = 15°, lip seals on both sides, non-contact, restricted tolerances

d	Bore diameter	100 mm
D	Outside diameter	140 mm
B	Width	20 mm
Cr	Basic dynamic load rating, radial	28.500 N
C0r	Basic static load rating, radial	23.500 N
Cur	Fatigue load limit, radial	2.270 N
nG Grease	Limiting speed for grease lubrication	13.000 1/min
≈m	Weight	0,851 kg
da	Diameter shaft shoulder	107 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	133 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	0,6 mm
ra1 max	Maximum recess radius	0,6 mm
a	Distance between the apexes of the pressure cones	26,1 mm
rmin	Minimum chamfer dimension	1,1 mm
r1 min	Minimum chamfer dimension	1,1 mm
α	Contact angle	15 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	80 °C
FV L	Preload force light	97 N
FV M	Preload force medium	291 N
FV H	Preload force heavy	583 N
KaE L	Lift-off force light	289 N
KaE M	Lift-off force medium	906 N
KaE H	Lift-off force heavy	1.883 N
ca L	Axial rigidity light	64,6 N/µm
ca M	Axial rigidity medium	101 N/µm
ca H	Axial rigidity heavy	137 N/µm
Contact angle	Contact angle 15°	C
Sealing	Contact lip seal on both sides	2RSD
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L