HS7024-E-T-P4S-UL FAG Catalog

Spindle bearings HS70..-E, adjusted, in pairs or sets, contact angle ? = 25°, restricted tolerances

d	Bore diameter	120 mm
D	Outside diameter	180 mm
B	Width	28 mm
Cr	Basic dynamic load rating, radial	46.500 N
C0r	Basic static load rating, radial	38.500 N
Cur	Fatigue load limit, radial	3.300 N
nG Grease	Limiting speed for grease lubrication	9.500 1/min
nG Oil	Limiting speed for oil lubrication	14.000 1/min
≈m	Weight	2,22 kg
da	Diameter shaft shoulder	131 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	169 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	2 mm
ra1 max	Maximum recess radius	1 mm
Etk min	Minimum diameter injection pitch	143,3 mm
Etk max	Maximum diameter injection pitch	146,4 mm
Etk1 min	Minimum diameter injection pitch	139,2 mm
Etk1 max	Maximum diameter injection pitch	146,4 mm
a	Distance between the apexes of the pressure cones	49 mm
rmin	Minimum chamfer dimension	2 mm
r1 min	Minimum chamfer dimension	2 mm
α	Contact angle	25 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	276 N
FV M	Preload force medium	828 N
FV H	Preload force heavy	1.656 N
KaE L	Lift-off force light	795 N
KaE M	Lift-off force medium	2.426 N
KaE H	Lift-off force heavy	4.942 N
ca L	Axial rigidity light	203 N/µm
ca M	Axial rigidity medium	302 N/µm
ca H	Axial rigidity heavy	392 N/µm
Contact angle	Contact angle 25°	E
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L