HS7026-E-T-P4S-UL FAG Catalog

Spindle bearings HS70..-E, adjusted, in pairs or sets, contact angle ? = 25°, restricted tolerances

d	Bore diameter	130 mm
D	Outside diameter	200 mm
B	Width	33 mm
Cr	Basic dynamic load rating, radial	60.000 N
C0r	Basic static load rating, radial	50.000 N
Cur	Fatigue load limit, radial	4.150 N
nG Grease	Limiting speed for grease lubrication	8.500 1/min
nG Oil	Limiting speed for oil lubrication	13.000 1/min
≈m	Weight	3,43 kg
da	Diameter shaft shoulder	142 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	189 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	2 mm
ra1 max	Maximum recess radius	1 mm
Etk min	Minimum diameter injection pitch	157,4 mm
Etk max	Maximum diameter injection pitch	161,2 mm
Etk1 min	Minimum diameter injection pitch	152,6 mm
Etk1 max	Maximum diameter injection pitch	161,2 mm
a	Distance between the apexes of the pressure cones	55 mm
rmin	Minimum chamfer dimension	2 mm
r1 min	Minimum chamfer dimension	2 mm
α	Contact angle	25 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	357 N
FV M	Preload force medium	1.070 N
FV H	Preload force heavy	2.139 N
KaE L	Lift-off force light	1.026 N
KaE M	Lift-off force medium	3.133 N
KaE H	Lift-off force heavy	6.381 N
ca L	Axial rigidity light	231 N/µm
ca M	Axial rigidity medium	344 N/µm
ca H	Axial rigidity heavy	446 N/µm
Contact angle	Contact angle 25°	E
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L