B71940-C-T-P4S-UL FAG Catalog

Spindle bearings B719..-C, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances

Replacements: B71940C.T.P4S.UL, B71940C.TPA.P4.UL

d	Bore diameter	200 mm
D	Outside diameter	280 mm
B	Width	38 mm
Cr	Basic dynamic load rating, radial	210.000 N
C0r	Basic static load rating, radial	179.000 N
Cur	Fatigue load limit, radial	12.200 N
nG Grease	Limiting speed for grease lubrication	4.500 1/min
nG Oil	Limiting speed for oil lubrication	7.000 1/min
≈m	Weight	5,954 kg
da	Diameter shaft shoulder	214 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	266 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	1 mm
ra1 max	Maximum recess radius	1 mm
Etk min	Minimum diameter injection pitch	224,7 mm
Etk max	Maximum diameter injection pitch	233,1 mm
Etk1 min	Minimum diameter injection pitch	224,7 mm
Etk1 max	Maximum diameter injection pitch	233,1 mm
a	Distance between the apexes of the pressure cones	51,2 mm
rmin	Minimum chamfer dimension	2,1 mm
r1 min	Minimum chamfer dimension	1,1 mm
α	Contact angle	15 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	1.127 N
FV M	Preload force medium	3.678 N
FV H	Preload force heavy	7.439 N
KaE L	Lift-off force light	3.433 N
KaE M	Lift-off force medium	12.027 N
KaE H	Lift-off force heavy	25.875 N
ca L	Axial rigidity light	180 N/µm
ca M	Axial rigidity medium	302 N/µm
ca H	Axial rigidity heavy	427 N/µm
Contact angle	Contact angle 15°	C
Lubricant		Without
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L